What is Cannabutter?
Cannabutter or cannabis butter is the staple of a wide range of edibles made using the marijuana plant. For endeavors and enthusiasts of marijuana, this is truly a delight. There are so many products that you can make using weed. Many of them have gotten quite popular. If you enrolled at the Cannabis Training University, you will learn all the steps of making cannabutter or marijuana butter.
Ingredients in Cannabutter
There are different ways of how to make cannabutter and there are different ingredients that you can use. Here, we will discuss how to make cannabutter using wax or trim. Cooking with marijuana is simpler when you make cannabutter. Butterfat oils are excellent solvents for CBD, THC and other medical marijuana compounds. Olive oil, butter, coconut oil, and clarified butter is known as ghee are all amazing solvents. One of the good things about these solvents is that they are quite healthy and they all actually taste good as well.
The Benefits of Using Cannabutter
There are several benefits to using cannabutter. One benefit is that it allows you to efficiently use marijuana leaves, kief and trim. It is also easier to measure the doses, beginning with identical batches. When you infuse butter with marijuana, you get cannabutter, which has been a recipe that many enthusiasts have enjoyed. After you make cannabutter, you can use it in various recipes such as making pot brownies, cookies, and pasta sauce. You can also eat cannabutter by itself, which allows you to easily consume medical marijuana without having to smoke it.
You can make cannabutter out of the trimmings or clippings from a marijuana harvest. You can crush the nugs of the marijuana as well and use it in your cannabutter recipe. So, you don’t have to use up the weed that you smoke, but instead use the residue from the plant, something that some people throw out when they don’t have to. But, make sure that you use the marijuana leaves and not their stems, although you can. Why? Well, stems don’t have as much cannabinoid oil compared to the leaves.
Starting the Process of Making Cannabutter
How do you begin the process? You do so by getting the trimmings or clippings ready. Gather the stems and debris and put away the water and sugar leaves. Use a food processor to break up or mulch the trimmings. The surface is going to play an important part if you want to get the most cannabinoid oil from the leaves. For example, if you were to boil a whole marijuana leaf, the outer part of the leaf is the only area that will react to the heat. However, if you were to grind the leaf in a food processor, you would get more cannabinoid oil from all the flakes. A weed grinder would not work as well as the food processor.
The Next Step
After breaking down the leaf to mulch, put it in your pot. If your batch of trimmings is small, you would use a smaller pot. The opposite is true for larger batches. Don’t fill the pot all the way to the top with mulch. Fill the pot a third of the way. Add sixteen ounces of water to every four ounces of butter. Bring everything to a boil under medium heat. Stir as necessary. As soon as you are three-quarter way through, you can turn the burner down to low heat.
You should boil until the water has been fifty percent evaporated, usually between three to four hours. You will know that you are finished when you notice the oil floating to the top. It is time to now strain everything, let it cool and refrigerate. Every few days, you still need to monitor it while it is refrigerated to make sure that there is no mold.
Why Use Trim, Leaves, and Stems For Cannabutter
Trim, leaves, and stems are leftover cannabis material after harvest. Trimmings, or trim, refers to the excess flower scraps that are cut off or fall off when pruning. Other cannabis material can include the plant’s stems and large fan leaves.
Instead of throwing away your cannabis stems, leaves, and trimmings, you can use these leftover materials to make a variety of cannabis-infused products including cannabutter. The majority of cannabinoids and terpenes, found in the plant’s trichomes, grow on flower buds, but a trace amount of cannabinoids and terpenes can be found on the leaves, stems, and trim.
Using cannabis trim, leaves, and stems saves users money when infusing them into meals or edibles. Using a high-quality flower bud is best reserved for smoking to get a clean and smooth hit. Low-potency trim, leaves, and stems can produce a harsh smoke when inhaled, which makes them a great ingredient for use in cooking instead.
Eating the leaves raw, however, won’t get someone high. While eating cannabis raw may have some health benefits, users must first decarboxylate the marijuana scraps in order to activate the plant’s compounds and infuse them into a cannabutter recipe.
How to Decarb Marijuana Trim, Leaves, And Stems
Before you can use your cannabis trim, leaves, and stems to follow a weed butter recipe, you must decarboxylate your marijuana. Decarboxylation occurs when cannabis compounds are activated, usually through high temperatures. Inactive compounds such as THCA and CBDA convert to the intoxicating THC and calming CBD compounds, respectively, when decarbed.
There are many cannabis decarboxylation methods. Cannabis users can decarboxylate trim, leaves, and stems in the oven. Simply set the oven temperature between 245ºF to 250ºF. Place the raw cannabis trim, leaves, and stems inside an ovenproof dish and cover the dish with a couple of layers of tin foil. Heat the cannabis for about 20 to 40 minutes.
Best Practices For Straining Cannabutter
Straining cannabutter after it’s been infused helps remove the unpleasant trim, leaves, and stem material or ground material from the cannabutter. A fine metal strainer can be used to filter the weed. Users can also use a spoon or similar kitchen utensil to press the cannabis in the strainer and squeeze out as much cannabutter as possible.
Cannabis users can also use multiple layers of cheesecloth to strain the cannabutter made from marijuana trim, leaves, and stems. Users can pour the cannabutter substance over the cheesecloth layers and into a large container.
Once all the butter is through, users can squeeze the cheesecloth gently to remove even more butter. When making cannabutter, individuals should wear gloves or some heat protection to avoid getting burned by the hot butter.
Cannabutter Potency And Dose
When estimating potency and dosage for cannabutter made with trim, leaves, and stems, there are a few factors to keep in mind. For instance, different strains contain varying cannabinoid and terpene levels.
Many strains can contain THC levels starting at 15 to 20 percent for premium flower buds. Cannabis trim, leaves, and stems, however, have a considerably lower THC count, especially when it’s made from a mixture of different strains. Trim can contain less than half the THC that its flower does, so experimentation is essential.
Because leftover cannabis material has an undetermined potency, each batch can have varying THC concentrations. THC concentration can vary due to the amount of trim, leaves, and stems used, the quality of the material, and the preparation methods.
Consuming edible cannabis products such as cannabutter infused meals elicits delayed effects from the moment of ingestion. The effects of edibles can take anywhere from 30 to 90 minutes to kick in.
New users should avoid overconsuming baked goods and other food infused with cannabutter. When done properly, however, making cannabutter out of trim, leaves, and stems can help improve a variety of medical symptoms.
Alternative Cannabutter Methods
While users can certainly make cannabutter directly from trim, leaves, and stems, users can also convert their leftover cannabis material into a range of products first such as kief, hash, and rosin.
Sugar leaves are an excellent starting material to make kief and hash. Users can use a trimming machine to gather the accumulated kief or collect kief using a silkscreen method where kief falls into a container below.
Cannabis trim can make excellent rosin or rosin can be pressed from the kief or hash made from unused marijuana material. Rosin, kief, and hash are all ingredients that can be used to make cannabutter. Not only can users take a dab of their trim-derived rosin, but they can also use some to make a delicious and potent edible or meal.
Cannabis College Online
Want to learn other ways to make cannabutter? Enroll at the best marijuana school today!
Learn how to cook with cannabis. Learn how to grow cannabis. Find out how to get a marijuana job. Start your own marijuana business. Learn how to start your own cannabis edibles business at the premier marijuana school. Start a career in marijuana today!
The #1-Rated Cannabis College is Cannabis Training University! Learn how to enter the booming marijuana business with online cannabis training today!
Image credit: https://www.flickr.com/photos/53699926@N02/5391441917/